Sen Centrifugal Pumpmonobloc Centrifugal Pump

• Customization: Available
• After-sales Service: on-Line Technical Support
• Warranty: One Year
• Model NO.: SEN
• Max.Head: 110m-150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Middle Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: <10m
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Circulating Pump
• Inlet/Outlet Flange: DN50 - DN350/DN32 - DN300
• Temperature Range: ~ +110ºC
• Max. Operating Pressure: Pn1.6MPa
• Shaft Sealing: Mechanical Seal
• Materials: Cast Iron/SS304/316/420/Duplex Ss
• Flange Standard: ISO / ANSI /DIN / JIS
• Product Standard: En733 / DIN24255
• Bearing: NSK or Chinese Brands
• Motor Brand: Siemens / Chinese Brands
• Transport Package: Standard Export Packaging
• Specification: According to the drawings
• Trademark: HydroBlue
• Origin: China
• HS Code: 8413709990
• Production Capacity: 10000 PCS/Year
• Package Size: 3000.00cm * 1200.00cm * 2000.00cm
• Package Gross Weight: 4500.000kg

Product Description

SEN CENTRIFUGAL PUMP MONOBLOC Centrifugal Pump
Close-coupled single-stage, end-suction, vertical discharge type centrifugal electric pump

Scope of supply
Pump supplied with bare shaft pump with motor, in horizontal design, painted to plant standard, sealed by a soft-packed stuffing box or by a mechanical sea, without coupling. (Electric Pump)

Add-on components to convert the pump to a complete pump / motor set:
Pump to be supplied with:
- Close-coupled centrifugal pump (for horizontal installation)

Guarantee, testing and quality control
Every pump is tested for correct functioning. The operating data are guaranteed without acceptance test in accordance with ISO 9906 Annex A, DIN 1944/III or comparable international testing standards.

Order data
- Electric Pump:
- Description of the pump according to "Designation"
- Capacity Q
- Total head H ( Hgeo and plant losses )
- Material combination
- Mating dimensions of flanges
- Mechanical seal material (Primary ring / Mating ring / Secondary seal / Others)
- Liquid handled and liquid temperature
- Accessories required
- Number of copies and language of operating manual
- Motor:
- Type of construction
- Type of enclosure
- Voltage, frequency, method of starting
- Ambient temperature
- Insulation class
- Accessories required

Pump description
The close-coupled centrifugal electric pump is designed for the pumping of cold water or any clear liquids which do not contain solids and are not corrosive, abrasive or explosive when in contact with the pump motor unit and its working parts

The SEN pump is a close-coupled single-stage centrifugal electric pump with an axial inlet and a vertical outlet. The dimensions of the volute pump casing, the suction and discharge diameters, and the casing feet correspond to the standards: DIN 24255 and NF EN 733.

Construction features
•  Main dimensions:  Apply to EN733 (DIN24255) standard and back pull out type
•  Casing structure:  End suction, center radial discharge
•  Flange pressure rate: ISO7005.2 PN1.6MPa
•  Shaft seal : Single mechanical seal ( Graphite / Ceramic / NBR / SS304), According to Standard EN 12756
On request:  Graphite / Silicon carbide / FPM / SS316
•  Driven shaft: Pump and motor flanged together to form a close-coupled unit, with common shaft.

Operation conditions
•  Working Temperature Range:  -10ºC ~ +90ºC
•  Max. Allowable Working Pressure (MAWP):  10bar  
Hydrostatic Test Pressure = 1.3 times the maximum discharge pressure, but not exceed 13 bar.

Pump specifications
•  Discharge flange diameter: DN32 - DN80 mm
•  Capacity Q range:  4.5m3/h - 240m3/h (50Hz)
•  Head H range:  10m - 92.5m
•  Operating speed:  2900RPM (50Hz) 3550 (60Hz)

Motor specifications
•  Totally Enclosed Fan Cooled asynchronous induction motor
•  Degrees of motor protection: IP55 (IEC60034-5)
•  Insulation Class: F
•  Degrees of motor protection: IP55 (IEC60034-5)
•  Duty: S1 continuous duty operation
•  Altitude shall not exceed 1000m above seal-level (IEC60034-1)
•  Allowed air temperature between -20ºC and 40ºC (IEC60034-1)
•  Winding:  (On request: Motor winding is protected with 3 PTC thermistors for tripping)

3 Phase	2 - 4HP	220-240VD / 380-420VY - 50Hz
	5.5 - 50HP	380-420VD / 660-725VY - 50Hz
1 Phase	2 - 2HP	220V - 50Hz / 240V - 60Hz

The Direction of Rotation
The rotation of the pump rotor is clockwise looking from the motor to the pump.  

On request:
•  Other operating voltages and frequencies
•  Special mechanical seal; special liquids
•  Special temperature

Application

 Water supply
 Fire-fighting systems
 Sprinkling
 Irrigation
 Drainage
 Heating
 Air-conditioning systems
 Drinking water
 Cooling water
 Swimming pool water
 Sea water
 Fire-fighting water
 Brackish water
 Condensate
 Oils
 Cleaning agents
 Service water
 Hot water

Pump type designation
SEN 50-200B

Pump model:  SEN 50-200B
SEN	HydroBlue EN733 standard pump
50	Discharge flange diameter: DN50 (mm)
200	Nominal diameter of impeller: Φ200mm
B	Times of cutting for impeller: A is the first time, B is the second time

Materials specifications for pump main parts:

Part Description	Materials Class	USA	Germany	Japan
		AISI , ASTM	DIN	JIS
Casing	Cast iron	Class 25B	GG-20	FC200
	Austenitic Stainless steel	CF-8, SS30	DIN 1.4308	SUS304
		CF-8M, SS316	DIN 1.4408	SUS316
Impeller	Cast iron	Class 25B	GG-20	FC200
	Austenitic Stainless steel	CF-8, SS304	DIN 1.4308	SUS304
		CF-8M, SS316	DIN 1.4408	SUS316
	Bronze	C83600	G-CuSn5ZnPb	BC6
Shaft	Carbon steel	1045	C45	S45C
	Martensite Stainless steel	AISI420	DIN1.4021	SUS410J1
	Austenitic Stainless steel	AISI304	DIN1.4301	SUS304
Motor bracket	Cast iron	Class 25B	GG-20	FC200
Shaft seal	Single mechanical seal Material: Graphite / Ceramic / NBR / SS304, According to Standard EN 12756 On request:  Graphite / Silicon carbide / FPM / SS316

Motor selection
Motors shall have nameplate power ratings, excluding the service factor ( if any), at least equal to the percentages of power at pump rated conditions given in below table. However, the power at rated conditions shall not exceed the motor nameplate rating.

Motor nameplate rating		Percentages of rated pump power (%)
(KW)	(HP)
< 22	< 30	125
≥22 ~ 55	≥30 ~ 75	115
≥ 55	≥ 75	110

For higher coolant temperatures and / or site altitudes higher than 1000 m above seal level, the specified motor output must be reduced.
Revise as shown in the picture below:
Vibration
In the operating range of 0.6 to 1.2 x Q_Opt: Veff ≤ 4.5 mm/s
- Q_{opt -----} Pump operating point

Noise
According to ISO 3746
Attention must be given to the exposure of personnel to the noise, and local legislation will define when guidance to personnel on noise limitation in required, and when noise exposure reduction is mandatory. This is typically 80 to 85 dBA.

The usual approach is to control the exposure time to the noise or to enclose the machine to reduce emitted sound.

You may have already specified a limiting noise level when the equipment was ordered, however if no noise requirement were defined, then attention is drawn to the following table to given an indication of equipment noise level so that you can take the appropriate action in your plant.

Pump noise level is dependent on a number of operational factors, flow rate, pipework design and acoustic characteristics of the building, and so the values given are subject to a 3 dBA tolerance and cannot be guaranteed.

Pump noise data sheet

Motor size and speed kW	A typical sound pressure level of 1 meters from the equipment, LpA, (dBA)
	3550 rpm		2900 rpm		1750 rpm		1450 rpm
	Pump only	Pump and motor	Pump only	Pump and motor	Pump only	Pump and motor	Pump only	Pump and motor
< 0.55	72	72	64	65	62	64	62	64
0.75	72	72	64	66	62	64	62	64
1.1	74	74	66	67	64	64	62	63
1.5	74	74	66	71	64	64	62	63
2.2	75	76	68	72	65	66	63	64
3	75	76	70	73	65	66	63	64
4	75	76	71	73	65	66	63	64
5.5	76	77	72	75	66	67	64	65
7.5	76	77	72	75	66	67	64	65
11	80	81	76	78	70	71	68	69
15	80	81	76	78	70	71	68	69
18.5	81	81	77	78	71	71	69	71
22	81	81	77	79	71	71	69	71
30	83	83	79	81	73	73	71	73
37	83	83	79	81	73	73	71	73
45	86	86	82	84	76	76	74	76
55	86	86	82	84	76	76	74	76
75	87	87	83	85	77	77	75	77
90	87	88	83	85	77	78	75	78
110	89	90	85	87	79	80	77	80
132	89	90	85	87	79	80	77	80
200					85	87	83	85
315					87	90	85	86

Note:
1. Noise levels within this range may require noise control.
2. The noise level of the greater motor power shall be discussed by the purchaser and the manufacturer / supplier.

Company Profile

COMPANY INTRODUCTION

Dongguan Hydroblue Tech Co.Ltd, setup in 2007, is known as a fast-growing provider for pumps, motors, sealing systems, couplings, gearboxes and engineering solutions. We are dedicated to provide customers with precise and reliable service by combining the manufacturing capability of mainland China with our supply chain management services through our extensive network of Chinese factories.

HydroBlue's vision is to provide our customers with the highest level of satisfaction imaginable by offering innovative solutions, nurturing long-term relationships, anticipating future needs and being highly responsive to their emergencies at the most cost effective basis.

Over the years, HydroBlue has established itself in Singapore,Malaysia,Indonesia,Thailand, Russia, Belarus, Ukraine and China market, focusing more and more on oil and gas industry, mining, utilities and government sectors.

 

HydroBlue Technical Advantages

Hydroblue Tech achievement is built by multiple sources. Its knowhow and capability is formed through close cooperation with China leading hydraulic institution--The Fluid Machinery Engineering and Technology Research Center of JIANGSU UNIVERSITY, and other machinery suppliers and engineering companies.




HydroBlue's Service

1.Calculation of pipeline loss
2.Reliable and precise pump model selection
3.Professional reverse-engineering for critical spare parts
4.Analysis for pump service data and results
5.Pump process supervision and control

 

HydroBlue's Products Range & Series


1.Water Treatment
Utter Water purification / Seawater Treatment / Concentration of Concentrated Salt-Zero Emission

2.Sewage Treatment

City sewage treatment / Industrial sludge / Industrial sewage / Electronics industry / Electroplating, printing and dyeing

3.API610 Petroleum Industry

Petroleum, Petrochemical and Natural Gas Industries (Refinery, Petrochemical, Oil & Gas etc.)

4.Thermal Power Plant

Cooling / Circulation / Boiler feed water / Condensate water

5.Pulp Industries

Palm oil , Sugar, Pulp & Paper plant

6.Air Conditioning & Fire Fighting Engineering

Air Conditioning / Fire Fighting

7.Chemical Industry

Coating / Ceramics / Food processing / Pharma

8.Pump Station

Hydraulic engineering / Pump station
9.Replacement / Repair Spare Parts
10.Digital Intelligent Control Water Pump

 

FAQ

Q1: Are you a factory or a trading company?

A: We are a professional service provider of customized complete solutions in the field of fluid machinery and fluid engineering.

Q2: What're your payments?

A: L/C, T/T, D/P, PayPal, Western Union, Small-amount payment

Q3: What about package?

A: Standard exportation packaging with polywood box.

Q4: How about the delivery time?

A: 30~90 days, Depend on quantity and season.

Q5: How about the MOQ?

A:  1 set.

Q6: How about the quality guarantee?

A: One year after commissioning or 18 months after delivery.